Camper Mod Contest Entries

Fresh Water Hose Filling Stabilizer

Welcome to the fifth entry in June’s Mini Mod-Ster Contest.  One great Mini-Mod will be published in every Email Alert in June.  At the end of the month we’ll hold a reader vote to determine June’s winner.  For information about the Mod-Ster Contest, including how to enter, click here.

Jeffrey McDonald, Mill Valley, California
Fresh Water Hose Filling Stabilizer
2005 Ford F-350
2008 Bigfoot 10.4

Fresh Water Hose Filling Stabilizer Holder

I have done many mods on my camper, but thought I would share this one since it is simple. I got tired of trying to keep the hose in while filling the fresh water tank. The weight of the hose and the water under pressure would force the hose out of the filling port.

Fresh Water Hose Extender

I decided that I needed some way to hold the hose while filling. So I took a piece of 2×2 aluminum angle that I fabricated.

Filling Stabilizer Without Hose

I also fabricated a holder for the filler hose connector.

Fresh Water Hose Filling Stabilizer

It has worked out great! It took me a half hour to complete this modification and cost me $5 for simple hardware parts.  In my opinion, the skill level of this modification is easy.

Disclaimer: The modifications above are submitted by Truck Camper Magazine readers. It is your responsibility to make sure that any do-it-yourself modification project you undertake is safe, effective, and legal for your situation.

Enter Your Mods Now!

If you’d like to enter a modification you’ve done on your truck camper, click here. You can enter as many mods as you want, at any time.  Good luck mod makers!

Truck Camper Chooser
To Top