To contact Torklift in Sumner, Washington about Torklift towing products, call 800-246-8132. To visit the Torklift website, go to torklift.com. For additional information, request a Torklift brochure.
Torklift SuperHitch Magnum 30K – MRP $1125.29
Does not include tax or shipping.
Torklift SuperHitch Magnum 30K is a frame-mounted receiver for towing with a truck camper.
Must Read: Torklift International Announces the SuperHitch Magnum 30K
The Torklift SuperHitch Magnum 30K is rated at 3,000 pound tongue weight and 30,000 pounds pull weight when used with weight distribution. The 3,000 pound tongue weight rating is specified as a safety factor. Hitch system tongue weight should be at least marginally higher than a trailer’s actual measured tongue weight.
The SuperHitch 30K uses Torklift International’s patented dual receiver design (2-1/2″ upper and 2″ lower). The dual receiver is designed to make it easier to tow behind your truck camper using a hitch extension.
Most applications are no-drill, are compatible with industry-standard ballmounts, and include hardened reinforced hitch pin locations to prevent common elongation wear known as egging. The Torklift SuperHitch Magnum 30K is made in the USA and has a lifetime warranty.
Torklift SuperHitch 20K – MRP $803.04
Does not include tax or shipping.
The Torklift SuperHitch 20K is a frame-mounted receiver for towing with a truck camper.
The Torklift SuperHitch 20K is rated at 2,000 pounds tongue weight and 20,000 pull weight when used with weight distribution for three-quarter ton and one-ton trucks. It uses Torklift International’s patented dual receiver design (2″ upper and 2″ lower) to max out Class V hitch capacities.
Designed specifically as an extension hitch system for truck camper towing applications, the SuperHitch uses the SuperTruss Receiver extension. The 2,000 pound tongue weight rating is specified as a safety factor. Hitch system tongue weight should be at least marginally higher than a trailer’s actual measured tongue weight.
Most applications are no-drill and are compatible with industry-standard ballmounts. Torklift SuperHitch 20K is designed with hardened reinforced hitch pin locations to prevent common elongation known as egging and a universal plug bracket to secure wiring harnesses. The Torklift SuperHitch is made in the USA and has a lifetime warranty.
SuperHitch Hero 15K – MRP $716.09
Does not include tax or shipping.
The Torklift International SuperHitch Hero 15K is a frame-mounted receiver for towing with a truck camper.
Must Read: Torklift International Announces SuperHitch Hero
The Torklift International SuperHitch Hero 15K is rated at 1,500 pounds tongue weight and 15,000 towing capacity when used with weight distribution. The 1,500 pound tongue weight rating is specified as a safety factor. Hitch system tongue weight should be at least marginally higher than a trailer’s actual measured tongue weight.
The Torklift International SuperHitch Hero 15K was created for Ford half-ton trucks. It uses Torklift International’s patented dual receiver design (2-1/2″ upper and 2″ lower). The dual receiver design makes it easier to tow behind your truck camper using a hitch extension.
Most applications are no-drill, are compatible with industry-standard ball mounts, and include hardened reinforced hitch pin locations to prevent common elongation wear known as egging. The Torklift SuperHitch Hero is made in the USA and has a lifetime warranty.
Torklift North Hitch – MRP $363.99-$413.99
Does not include tax or shipping.
The Torklift North Hitch is a front hitch designed for bike racks, battery trays, spare tires, generators, and more.
Must Read: Torklift International Announces the North Hitch
The Torklift North Hitch is a front hitch for Ford, Ram, Chevy and GMC trucks.
The North Hitch is made from steel. The straight-line pull rating is 10,000-pounds. The vertical load capacity is up to 1,000-pounds.
The existing holes and fasteners from the factory are used which means that the North Hitch is a no-drill installation.
The Torklift North Hitch is made in the USA and has a lifetime warranty.
Torklift SuperTruss Extension – MRP $675.17
Does not include tax or shipping.
Torklift SuperTruss Extensions are designed for use with Torklift SuperHitch 20K and SuperHitch Magnum 30K towing products to tow behind your truck camper.
The Torklift SuperTruss Extension is designed to allow you to tow while using a camper with an overhang that extends past the trailer hitch to a point where the trailer can no longer reach the hitch.
The Torklift SuperTruss Extension is available in eight lengths from 21″ to 60″ and works exclusively with the Torklift SuperHitch Outlaw Series towing line.
The Torklift SuperTruss Extension is rated to safely tow up to 14,000 pounds and 1,400 pounds tongue weight on a 21” extension and 12,000 pounds and 1,200 pounds tongue weight on a 48” extension. The Torklift SuperTruss Extension is made in the USA and has a lifetime warranty.
Torklift Cannon Extension – MRP $523.06
Does not include tax or shipping.
Torklift Cannon Extensions are designed for use with Torklift SuperHitch 20K and SuperHitch Magnum 30K towing products to tow behind your truck camper.
The Torklift Cannon is the only trailer receiver hitch extension manufactured specifically for 2017-2019 Super Duty Ford trucks with the all-new 3-inch factory receiver.
It is perfect for a truck camper or anything else that creates overhang or the need for an extension. The Cannon utilizes the SuperTruss patented lateral support safety chains and an all-new built-in set bolt system that prevents extension and receiver movement while towing.
Lengths for this trailer receiver extension are 36”, 42” and 48”. The Cannon extension achieves high tow ratings thanks to its internal reinforcement and is rated to tow up to 7,200 pounds and 720 pounds tongue weight.
The Torklift Cannon Extension is made in the USA and has a lifetime warranty.
Torklift SuperTruss SkidWheel – MRP $155.49
Does not include tax or shipping.
The Torklift SuperTruss SkidWheel is designed for use with Torklift SuperHitch 20K and SuperHitch Magnum 30K towing products.
The Torklift SuperTruss SkidWheel is designed to prevent your towing gear from dragging or striking the ground when entering or leaving areas with a steep incline. The Torklift SuperTruss SkidWheel is made in the USA and has a lifetime warranty.
Torklift Cannon SkidWheel – MRP $155.49
Does not include tax or shipping.
The Torklift Cannon SkidWheel is designed for use with Torklift SuperHitch 20K and SuperHitch Magnum 30K towing products.
If you have a Torklift Cannon trailer receiver extension and are planning on towing heavy weights, such as a large boat, trailer or large cargo tray, it’s a good idea to consider getting a Cannon SkidWheel.
This Torklift SkidWheel works exclusively with the Cannon and Ford factory 3” hitch system. The Cannon SkidWheel allows the SkidWheel to make contact with the ground before the extension receiver when towing heavy loads and a long extension. That way your towing equipment never reaches the ground. Because the Cannon SkidWheel roller is made out of stainless steel, it can handle the toughest road conditions without rusting.
The Torklift Cannon SkidWheel is made in the USA and has a lifetime warranty.
Torklift Wiring Harnesses – MRP $111.33 – $290.78
Does not include tax or shipping.
Torklift Wiring Harnesses are designed for use with the Torklift SuperHitch and SuperHitch Magnum towing products.
2-Way Wiring Pigtail
Torklift 2-Way Wiring Pigtail extensions are designed for installations with any hitch extender. Torklift 2-Way Wiring Pigtail extensions will provide an extension from the seven-way connector on your bumper to the trailer seven-way connector.
Torklift 2-Way Wiring Pigtail extensions are designed as an affordable alternative to hardwiring your truck with a quick installation to ensure taillights and brake lights function.
Torklift 2-Way Wiring Pigtail extensions are needed when you have a camper on the truck and are using a hitch extender. The Torklift 2-Way Wiring Pigtail is made in the USA and has a 90-day warranty.
3-Way Wiring Pigtail
Torklift 3-Way Wiring Pigtail extensions are no-splice, truck-to-camper wire harnesses designed to plug into your existing rear seven-way RV plug. Torklift 3-Way Wiring Pigtail extensions are designed as an affordable alternative to hardwiring your truck with a quick installation to ensure taillights and brake lights function.
Torklift 3-Way Wiring Pigtail extensions leave two open connectors, one extending up to your truck and one for towing your trailer. Torklift 3-Way Wiring Pigtail extensions are designed for use with the Torklift SuperTruss Extension or other extended systems.
The multi-purpose wire harness extends your trailer wiring and supplies a lead for your camper wiring. Torklift 3-Way Wiring Pigtail extensions are made in the USA and have a 90-day warranty.
Torklift Shank 30K and Shank XL 30K – MRP $437.83 – $463.41
Does not include tax or shipping.
Torklift Magnum Shanks are used with the Torklift SuperHitch and SuperHitch Magnum towing products.
The 30K shank inserts into the SuperHitch 20K or SuperHitch Magnum 30K and provides a variety of levels of attachment points to connect a weight-distributing hitch or the Torklift ball mount and pintle hook adapters.
Torklift shank inserts work with all standard weight distribution systems and feature an industry-standard bolt pattern with 3/4″ holes. The 30K XL Shank inserts into the SuperHitch 20K or SuperHitch Magnum 30K and provides additional drop length serving as the connection for use of a weight distribution towing system. This 30K XL Shank has 3/4” holes and is used with other manufacturer weight distribution systems on the market.
Torklift Original 20K Adapters – MRP $227.10 – $341.67
Does not include tax or shipping.
Torklift Original 20K Adapters are used with the Torklift SuperHitch Original 20K and SuperHitch Magnum 30K towing products.
The Torklift Magnum 30K Ballmount Adapter and Magnum 30K Pintle Adapter are designed to work with Magnum 30K Shanks. The Magnum 30K Ballmount Adapter includes dual swayball mounts and grade-eight hardware.
This accessory allows the connection of the Magnum 30K shank to the ball mount (ball not included). The Magnum 30K Pintle Adapter connects the pintle to the Magnum shank. This part includes grade eight hardware (pintle not included).
The Torklift Shank Adapter 20K for Pintle Hooks combination incorporates a dual shank design and is engineered to use an aftermarket pintle hook or for standard trailer ball use.
The Ball Mount Adapter 20K connects the shank adapter to the ball mount (ball not included) should you desire a standard ball mount application. This adapter includes dual swayball mounts and grade eight hardware.
Torklift 2.5” to 2” Reducer Sleeve and 30K Ball – MRP $55.23 – $73.65
Does not include tax or shipping.
Torklift Magnum Adapter Sleeve and Ball are used with the Torklift SuperHitch and SuperHitch Magnum towing products.
The Magnum 30K Reducer Sleeve converts 2.5” to 2” and alleviates the rattle and slop problems associated with other adapter sleeves by maintaining a close tolerance design. The Magnum 30K Adapter Sleeve features enlarged pinholes to alleviate ball mount adapted and receiver hitch pin alignment issues. This towing system has a one and one quarter shank 30K trailer ball.
Torklift SuperHitch Everest Weight Distribution 30K – MRP $1,994.43
Does not include tax or shipping.
Torklift SuperHitch Everest is a weight distribution system for towing with a truck camper.
Must Read: Torklift International Announces the SuperHitch Everest
The Torklift SuperHitch Everest is rated at 3,000 pounds tongue weight and 30,000 pounds pull weight. It’s designed for the latest towing capabilities of heavy hauler trucks. It comes with a hydraulic spring bar tension assist to avoid manual lifting of the tension bars, adjustable chain collars for various mounting locations (to get around jacks, battery packs, or anything else affixed to the tongue). The Torklift SuperHitch Everest works with the Torklift SuperHitch Magnum. The Torklift SuperHitch Everest is made in the USA and has a lifetime warranty. The SuperHitch Everest drop shank and high-capacity trailer ball are sold separately.
Torklift SuperHitch Everest 30K (WD) System Ballmount Accessories – MRP $437.83 – $463.41 (M9010, M9011)
Does not include tax or shipping.
Torklift SuperHitch Everest 30K (WD) System Ballmount Accessories are used with the Torklift SuperHitch Everest Weight Distribution hitch.
The Torklift SuperHitch Everest 30K (WD) System Ballmount accessories are designed to work exclusively with Torklift’s 30K Weight Distribution system. The Magnum Shank 30K incorporates special 1” holes.
The Shank XL 30K is used exclusively with the Everest which is rated at 30K. It has larger 1” holes for the Everest ball mount versus the industry standard 3/4” for other ball mounts. The Torklift SuperHitch Everest 30K (WD) System Ballmount Accessories are made in the USA and have a lifetime warranty.
Torklift SuperHitch Everest Accessories – MRP $103.15 – $192.76
Does not include tax or shipping.
Torklift SuperHitch Everest 30K (WD) System Accessories are used with the Torklift SuperHitch Everest Weight Distribution hitch.
Torklift SuperHitch Everest is designed for the latest towing capabilities of heavy hauler trucks. Separate accessories include a friction plate replacement kit that prevents friction between the yoke and ball mount for the SuperHitch Everest.
Additional hookup clips are available for hydraulic assistance. Cam over leverage arms are available separately for engaging the hookup clips. The Torklift SuperHitch Everest 30K (WD) System Accessories are made in the USA and have a lifetime warranty.
Click here to read all Torklift articles in TCM. All information and photographs were provided by Torklift International. To request more information on Torklift products, click here.