Camper Mod Contest Entries

Easy to Deploy Truck Camper Sun Shade

Welcome to the PowerMod truck camper mod contest, sponsored by Goal Zero. One mod will be published in every Email Alert in November. At the end of the month, a reader vote will determine a winner. Click for information about the 2024 PowerMod Contest, including how to enter.

Truck Camper Sunshade

Jon Z, Charleston, South Carolina
Easy to Deploy Truck Camper Sun Shade
2009 Ram 2500
Palomino SS-1200

I was having difficulty finding a lightweight, simple-to-deploy, and easy-to-store sunshade.

I purchased a Camp Awn Shelter from Mountain Hardware which is made of 68D PU-coated waterproof polyester ripstop.

Easy To Deploy Truck Camper Sun Shade 8

It came complete with two thick aluminum poles with adjustable heights up to ten feet and ten stakes with adjustable cording.

Easy To Deploy Truck Camper Sun Shade 6

I’m a big fan of Seasucker products and always have a few of their suction cups onboard to keep my microwave from moving while underway. I also use their suction cups for mounting exterior drink holders and interior and exterior tie-downs.

Easy To Deploy Truck Camper Sun Shade 3

For a quick drill-free mount, I threaded two eye bolts into the Seasucker mounts and attached them to the outside of the camper. They are also available with attached D-rings which would probably work even better.

I then clipped the Camp Awn Shelter to the eye bolts with two stainless carabiners. Next, I installed the poles into the middle grommets and staked them out with the attached cords to keep them upright.

Easy To Deploy Truck Camper Sun Shade 4

Easy To Deploy Truck Camper Sun Shade 5

The awning can then be folded in half and attached back to the suction cups on the camper. If more shelter is needed, it can be staked on an angle downward and outward.

Easy To Deploy Truck Camper Sun Shade 7

It takes me ten minutes to deploy the shade by myself. It’s lightweight and works well for my needs.

Materials Used:
Camp Awn Shelter ($119)
Seasucker with Stainless Steel D-Ring ($59 each)

Easy To Deploy Truck Camper Sun Shade 9

It took me one hour to complete this modification and cost me under $200.

Disclaimer: The modifications above are submitted by Truck Camper Magazine readers. It is your responsibility to make sure that any do-it-yourself modification project you undertake is safe, effective, and legal for your situation.

Enter Your Mods Now!

If you’d like to enter a modification you’ve done on your truck camper, click here. You can enter as many mods as you want, at any time.  Good luck mod makers!

Truck Camper Chooser
To Top