Welcome to the third entry in February’s Mini Mod Contest. One Mini Mod will be published in every Email Alert in February. At the end of the month, we’ll hold a reader vote to determine February’s winner. Click here for information about the 2023 Mod Contest, including how to enter.
Terry Fleming, Scottsdale, Arizona
Large Magnet Board For Camper Walls
1999 Ford F-350
2018 Adventurer 80RB
About a year ago, we were attracted to the idea of collecting refrigerator magnets and mounting them inside the camper. That turned out to be an excellent choice as we often look at the magnets and reminisce over the places we have been.
We needed a way to display them. I purchased a 24 x 36 inch sheet of galvanized steel at Home Depot for about $15 and a dozen ¾-inch sheet metal screws. I used a utility knife and a carpenter’s square to cut the metal to shape and added some holes for mounting.
So far so good!
It took me 30 minutes to complete this modification and cost me less than $20. In my opinion, the skill level of this modification is easy.
Disclaimer: The modifications above are submitted by Truck Camper Magazine readers. It is your responsibility to make sure that any do-it-yourself modification project you undertake is safe, effective, and legal for your situation.
Enter Your Mods Now!
If you’d like to enter a modification you’ve done on your truck camper, click here. You can enter as many mods as you want, at any time. Good luck mod makers!